Need help?Do you have a question about the Eaton DX 2000 LAN and is the answer not in the manual?
General| Power Rating | 2000 VA |
|---|---|
| Real Power | 1800 W |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Output Power Factor | 0.9 |
| Frequency Range | 50/60 Hz |
| Topology | Double Conversion Online |
| Form Factor | Tower |
| Transfer Time | 0 ms |
| Number of Outlets | 8 |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-50°C |
| Humidity | 0-95% non-condensing |
| Battery Type | Sealed Lead-Acid (SLA) |
| Typical Recharge Time | 3 hours to 90% |
| Communication Ports | USB, RS-232 |
Guidelines for safely installing the UPS unit, covering environmental factors and proper wiring.
Instructions on how to operate the UPS safely, including startup, shutdown, and basic usage.
Procedures and precautions for maintaining the UPS, focusing on battery safety and servicing.
Procedures for installing the UPS, including wiring, circuit breaker, and load connections.
Specific steps for connecting and installing external battery packs to the UPS.
Procedure to start the UPS using the AC power source, including initial checks and button presses.
Procedure to start the UPS using only the battery power source without AC input.
Information on what happens during a critical fault, and recommended actions.
A guide to resolving common UPS issues based on LCD warning and fault codes.
To Next Page