Need help?Do you have a question about the Eaton Evolution 2000 RT 2U and is the answer not in the manual?
Details on tower and rack mounting configurations for UPS units.
Identifies and describes connectors and ports on the back of various UPS models.
Explains the buttons, LEDs, and indicators on the UPS front panel.
Guide to unpacking the UPS and verifying all included components.
Instructions for setting up the UPS in an upright, vertical orientation.
Steps for mounting the UPS unit into a standard 19-inch equipment rack.
Details on connecting RS232, USB, or optional communication cards.
How to connect the UPS to an optional FlexPDU for expanded power distribution.
Instructions for connecting the UPS to an optional HotSwap MBP for serviceability.
Guidelines for connecting the UPS directly to the power source and loads.
Procedures for powering on the UPS and its normal operating states.
How the UPS functions when AC power is unavailable and switches to battery.
Describes UPS behavior when AC power is restored after an outage.
How to properly turn off the UPS unit.
Explains RPO and ROO functions for remote management.
Settings for output voltage and overload thresholds via software.
Configuring voltage transfer points for battery operation.
Adjusting the UPS's sensitivity to power fluctuations.
Customizing automatic start, cold start, and shutdown behaviors.
Settings for battery tests, warnings, and discharge protection.
Guide to diagnosing and resolving common UPS issues.
Step-by-step instructions for replacing the UPS battery module.
Specific maintenance for UPS units with the HotSwap MBP option.
Information on technical training courses offered by Eaton.
Detailed technical data, ratings, and environmental specifications for the UPS.
Definitions of key terms and acronyms used in the manual.
To Next Page
General