EasyManua.ls Logo

Eaton Evolution S 2500 RT 2U User Manual

Eaton Evolution S 2500 RT 2U
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.eaton.com
Evolution
S 1250 RT 2U
S 1750 RT 2U
2000 RT 2U
S 2500 RT 2U
S 3000 RT 2U
S 3000 RT 3U
S EXB 1250/1750 RT 2U
S EXB 2500/3000 RT 2U
S EXB 2500/3000 RT 3U
Installation and user
manual
English
Français
Deutsch
Italiano
Español
Nederlands
Pulsar Series

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Eaton Evolution S 2500 RT 2U and is the answer not in the manual?

Eaton Evolution S 2500 RT 2U Specifications

General IconGeneral
Power Rating2500 VA
Capacity2.5 kVA
Nominal Input Voltage230 V
Input Voltage230 V
Output Voltage230 V
Output Frequency50/60 Hz
Humidity0-95% non-condensing
Form Factor2U Rackmount
TopologyOnline Double Conversion
Battery TypeSealed Lead Acid
RuntimeVaries based on load
Communication PortsUSB, RS-232, Network
Output Connections(8) IEC C13, (1) IEC C19
Input ConnectionIEC C20
Operating Temperature0°C to 40°C
Output power capacity2250 Watts

Summary

Introduction to Eaton UPS Systems

Environmental Protection and Eco-Design

EATON's environmental protection policy and eco-design approach for products.

Pictograms and Symbols Guide

Explanation of icons used for instructions, advice, actions, and audio signals.

UPS Presentation and Specifications

UPS Standard Installation Positions

Details on tower and rack mounting configurations for UPS units.

UPS Rear Panel Overview

Description of connectors and ports on the back of Evolution UPS models.

UPS Control Panel Layout

Overview of the UPS control panel, including indicators and buttons.

UPS Installation Procedures

Unpacking and Verifying UPS Contents

Procedure for unpacking the UPS and verifying all supplied components.

Installing the UPS in Tower Position

Instructions for setting up the UPS in an upright tower configuration.

Installing the UPS in Rack Position

Steps for mounting the UPS into a standard 19-inch rack.

UPS Communication Port Connections

Details on RS232/USB ports, communication cards, and contact characteristics.

UPS Operation and Management

Starting Up the UPS and Normal Operation

How to power on the UPS and its behavior under normal AC power conditions.

UPS Operation on Battery Power

How the UPS functions when AC input power is lost and battery support is active.

Restoring AC Input Power to the UPS

UPS behavior when AC power is restored after an outage.

Shutting Down the UPS

Procedure for safely powering down the UPS unit.

UPS Remote Control Functions

Using RPO and ROO functions for remote UPS control via external contacts.

Personalising UPS Settings with Software

Comprehensive UPS Personalisation Options

Configuration options for output, voltage thresholds, sensitivity, ON/OFF, and battery.

UPS Maintenance and Troubleshooting

Troubleshooting UPS Issues

Guidance on identifying and resolving common UPS issues.

Replacing the UPS Battery Module

Safety precautions and step-by-step instructions for replacing the UPS battery.

HotSwap MBP Module Maintenance

Specific maintenance procedures for UPS units equipped with the HotSwap MBP module.

Eaton UPS Training Programs

Information on technical training courses offered by EATON.

UPS Appendices and Specifications

Detailed UPS Technical Specifications

Detailed technical data and specifications for the Evolution UPS series.

Glossary of UPS Terms

Definitions of key terms and acronyms used in the manual.

Related product manuals