To Next PageTo Next PageWhat to do if the Eaton EX 1000 UPS load is no longer supplied if AC power fails?
If your Eaton UPS load is no longer supplied when AC power fails, ensure that the rotary switch on the HotSwap MBP module is set to the Normal position. Also, verify the wiring between the UPS and the HotSwap MBP module.
What to do if Eaton UPS load isn't supplied when the rotary switch is in the Normal position?
If the Eaton UPS load is no longer supplied when the rotary switch on the HotSwap MBP module is in the Normal position, first, try starting the UPS. If that doesn't work, check the wiring between the UPS and the HotSwap MBP module.
What to do if the Eaton UPS load is no longer supplied in Normal position?
If the load is no longer supplied when the rotary switch on the Eaton UPS HotSwap MBP module is in the Normal position, first ensure that the UPS is started. Also, check the wiring between the UPS and the HotSwap MBP module.
General| Noise level | 45 dB |
|---|---|
| Output power | 900 W |
| Input frequency | 40/70 Hz |
| Output power capacity | 1 kVA |
| Input operation voltage (max) | 284 V |
| Input operation voltage (min) | 100 V |
| Output operation voltage (max) | 250 V |
| Output operation voltage (min) | 200 V |
| Power plug | C14 coupler |
| AC outlet types | C13 coupler |
| AC outlets quantity | 6 AC outlet(s) |
| USB 2.0 ports quantity | 1 |
| Safety | IEC/EN 62 040-1, IEC/EN 62 040-2, IEC/EN 62 040-3 (VFI-SS-113), IEC/EN 60 950-1 (RD) |
| Form factor | Tower |
| Product color | Gray |
| LED indicators | Yes |
| Typical backup time at full load | 3 min |
| Typical backup time at half load | 14 min |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 153 mm |
| Height | 242 mm |
| Weight | 15000 g |
Critical safety guidelines for installation and maintenance of UPS and batteries.
Explains the meaning of various symbols used in the manual for clear communication.
Precautions related to electrical hazards, battery handling, and system grounding.
Guidelines for proper UPS installation, wiring, and environmental considerations.
Notes on handling, installation requiring multiple people, and battery storage.
Details the product's environmental design and recycling guidelines.
Details the physical dimensions and configurations for tower and rack mounting of UPS models.
Identifies and describes all connectors and ports located on the rear of the UPS units.
Describes the front panel interface, including LEDs, display, and buttons for operation.
Guides the user through unboxing the UPS and verifying all included accessories.
Instructions for installing the RT model in tower or rack configurations.
Explains how to connect communication cables (RS232, USB) for UPS management.
Describes how to use contact closures for remote UPS control and signaling.
Instructions for connecting optional FlexPDU units for expanded outlet management.
Steps for connecting the UPS to the AC power source and connected loads.
How to power on the UPS and what to expect during normal functioning.
How the UPS operates when AC power is lost and battery power is used.
What happens when AC power is restored after an outage.
Instructions on how to safely turn off the UPS unit.
Details on using remote power off (RPO) and remote on/off (ROO) features.
Overview of the menu structure for accessing UPS status and settings.
How to view key UPS measurements like voltage, current, and battery status.
Guide to configuring UPS settings directly via the front panel interface.
Instructions for using software to customize UPS operational parameters.
Common issues, fault indicators, and corrective actions for UPS problems.
Detailed steps for safely removing and replacing the UPS battery modules.
Comprehensive technical data, ratings, and certifications for the UPS models.
How to configure specific output outlets for timed power delivery or shutdown.
Definitions of key terms and acronyms used throughout the manual.
