What to do if the Eaton EX EXB UPS load is no longer supplied if AC power fails?
If your Eaton UPS load is no longer supplied when AC power fails, ensure that the rotary switch on the HotSwap MBP module is set to the Normal position. Also, verify the wiring between the UPS and the HotSwap MBP module.
What to do if Eaton EX EXB UPS load isn't supplied when the rotary switch is in the Normal position?
If the Eaton UPS load is no longer supplied when the rotary switch on the HotSwap MBP module is in the Normal position, first, try starting the UPS. If that doesn't work, check the wiring between the UPS and the HotSwap MBP module.
What to do if the Eaton UPS load is no longer supplied in Normal position?
If the load is no longer supplied when the rotary switch on the Eaton UPS HotSwap MBP module is in the Normal position, first ensure that the UPS is started. Also, check the wiring between the UPS and the HotSwap MBP module.
Eaton's environmental policy, eco-design approach, and substance compliance.
Instructions for sorting and disposing of packaging materials, with recycling symbols.
Eaton's process for handling products at their end of service life.
Explanation of symbols used in the manual for safety and status indications.
Description of tower and rack mounting configurations for the UPS units.
Diagrams and identification of rear panel connectors for different UPS models.
Overview of the UPS control panel, including buttons and display elements.
Procedure for unpacking the UPS and verifying all supplied accessories and components.
Step-by-step guide for installing the RT model UPS in a vertical orientation.
Instructions for mounting the RT model UPS into a standard 19-inch rack.
Connecting RS232 or USB communication cables to the UPS for data transfer.
Guide for installing optional communication cards into the UPS slot.
Details on the RS232 port pinout and its optocoupler contact characteristics.
Connecting the UPS to a FlexPDU module for power distribution to multiple devices.
Connecting the UPS to a HotSwap MBP module for maintenance without downtime.
Steps for directly connecting the UPS to the power source and loads.
Procedure for starting the UPS and understanding its normal operational status.
How the UPS functions when AC power is lost, including battery status.
How the UPS automatically restarts when AC power is restored.
Procedure for safely shutting down the UPS unit.
Explanation and usage of Remote Power Off (RPO) and Remote ON/OFF (ROO) functions.
Overview of the UPS display menu structure for status, alarms, and measurements.
How to navigate UPS menus using the scroll button to view measurements.
Steps for configuring UPS settings like language and audio alarm via the control panel.
Configuration options for output voltage, frequency, and overload settings.
Settings for start-up, restart, energy saving, and phase/neutral detection.
Configuration options for battery test, low-battery warning, and backup time.
Instructions for installing and using the Personal Solution-Pac software for UPS configuration.
Guide to identifying and resolving common UPS faults and error indications.
Safety precautions and detailed procedures for replacing the UPS battery modules.
Specific maintenance procedures for UPS units that include a HotSwap MBP module.
Information on technical training courses offered by Eaton for UPS products.
Detailed technical data, specifications, and certifications for the UPS series.
Definitions of technical terms and acronyms used throughout the manual.
To Next Page
General
