Eaton EX EXB - 2.2 Installation of the RT model in tower position; 2.3 Installation of the RT model in a rack

34008097EN/AE - Page 10
2. Installation
2.2 Installation of the RT model in tower position
2.3 Installation of the RT model in a rack
It is advised to install the battery EXB module(s) at the lowest position in the rack, then install the UPS above.
Follow steps 1 to 4 for module mounting on the rails.
The rails and necessary hardware (37) are supplied by EATON.
3
2
4
2
4
1
1
1
1
34008097EN_AE.fm Page 10 Mardi, 2. décembre 2008 10:09 10