Eaton EX EXB - 2.4 Communication ports

34008097EN/AE - Page 11
2. Installation
2.4 Communication ports
Connection of RS232 or USB communication port (optional)
The RS232 and USB communication ports cannot operate simultaneously.
Tower model
1 - Connect the RS232 (33) or USB (34)
communication cable to the serial or USB
port on the computer equipment.
2 - Connect the other end of the
communication cable (33) or (34) to the
USB (1) or RS232 (2) communication port
on the UPS.
The UPS can now communicate with
EATON power management software.
RT model
34
33
2
1
34
33
1
2
34008097EN_AE.fm Page 11 Lundi, 1. décembre 2008 4:31 16