Eaton EX EXB - Mounting the New Battery Module

34008097EN/AE - Page 23
5. Maintenance
Mounting the new battery module
Carry out the above instructions in reverse order.
C - Remove the 4 fixing screws metal
protection cover of the battery.
D - Remove the metal protection cover of
the battery.
E - Pull the plastic tab to remove the
battery block and replace it.
◗ To ensure safety and high performance, use only batteries supplied by EATON.
◗ Take care to firmly press together the two parts of the connector during remounting.
C
D
E
34008097EN_AE.fm Page 23 Lundi, 1. décembre 2008 4:31 16