Eaton EOP5T07 - User Manual

Eective October 2011
Supersedes IL29C204H 9/11
Instruction Leaflet IL29C204I
Installation Instructions for Motor Operator for
3- and 4-Pole ND, NB, NC, MD, MA, MC Type
Circuit Breakers and Molded Case Switches
Contents
Description Page
1. Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Eaton EOP5T07 Specifications

General

Category	Control Unit
Input Voltage	24 V DC
Output Voltage	24 V DC
Output Current	7 A
Protection	Short Circuit, Overload, Overvoltage
Operating Temperature	-25°C to +70°C

Summary

Introduction to Motor Operator

Motor Operator Installation Procedures

Product Listing and Connector Kits

Details UL listing as a recognized component and mentions the OPTIM Connector Kit.

Initial Mounting and Handle Extension

Covers removing operator, installing handle extension, mounting plates, and initial mounting.

Final Installation and Wiring Connections

Includes push-to-trip verification, wiring lead modification, and power/control wiring connections.

Operating the Motor Operator

Electrical and Manual Operation

Explains remote control via push buttons and manual operation using the handle extension.

Lock-off and Power-off Modes

Covers securing the operator in a lock-off position and power disconnection methods.

Motor Operator Adjustment

Limit Switch Adjustment Procedures

Provides procedures for adjusting upper and lower limit switches for carriage travel.