Eaton FS-4005C - Page 48

REASSEMBLY - TRANSMISSION
Reassembly Countershaft and Reverse Idler (cont.)
13. Rota1e 1hecounte1shatt to seat tho bearings and 1aces
Position the dial 1t1dicator as sOOwn . lilt the countershaft
with a screwdfrl/ertomeasuro tho.end ptny End play must
be set aJ .00 2-.0 08 (0.05·0.20 mm) Add shims tor more
end play and 1emove stllms lor loss end play
NOTE : Once end play Is cotrecl remove the retainet and
apply a light coat ot LoctilB #510 to each side of tho shims
and the tataln9f lace
Coat w 1th Loc11 1e #262and tighten to the
recommended torque .
1 4. Install Ille oountersha.ft 1earbaa11ng covoc and gas1<e1
Coatcapscrewthreads wtlh Loeltle #262 and bghten co tho
recommended torque .