Eaton FS-4205B - Model Designations and Specifications

MODEL DESIGNATIONS
AND
SPECIFICATIONS
Nomenclature:
F S-
Fuller"'
I
Letter Designations
Synchronized----------""""'
Specifications:
GearRat'os
Ne.
Model
Speecs 1 st 2 nc
3 ·a
4th
FS-5005A
5
7.52
2.54
2.54 1.52
FS-50058
5 6.82 2.15
2.15 1.28
FS-5005C
5
6.82
1.99
1.99 1.17
5005A
I
Number Designations
Ratio Group
5 '.1
1.00
1.00
1.00
Forward Speeds
Design
Level
x 100 = Nominal Torque
Capacity
IMPORTANT: All Eaton Fuller Transmissions are
identified by the model and serial number. This
information
is stamped on the transmission identifi-
cation tag and affixed to the case.
DO NOT REMOVE OR DESTROY THE TRANSMIS-
SION IDENTIFICATION TAG.
Reial ve Soeed
No:c ·
2 Note S
PTO 3ear:::
_e-g111
l//eo':
Q,I Caoaci:y
lnpc:
ir. Los.
Pi-ts
Rf:'ver:;e
Rig rt Li:/t
'"1:'1)
:Kg)
1Uersi
6.27
.460 .435
21.9
280
10.5
(556.0)
(127.0)
(5.0}
5.30
.543 .515
21.9
280
10.5
(556.0)
(127.0}
(5.0)
5.30
.543 .515
21.9
280
10.5
(556.0)
(127.0)
(5.0}
1. Lengths measured from clutch housing face to speedo gear rear.
2. Weights include shift bar housing, clutch housing, less tower assembly, and clutch release parts. For more
information on available clutch housings, see the transmission's Illustrated Parts List or the Super Parts Book.
All weights are approximate.
3. Oil capacities are approximate, depending on inclination of engine and transmission. Always fill transmission,
with proper grade and type of
lubricant, to level of filler opening. See LUBRICATION.
3