39INSTALLATION AND OPERATION MANUAL 25-16329-B December 2019 www.eaton.com
Section 3: Panel controls & indicators
Evacuate (access level 2)
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode Passcode and select “Evacuate” on the menu at the top
of the screen.
Select “Yes” to evacuate the building.
Silence
Alarms
Reset
Others
View Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Mute
Buzzer
Evacuate
Pre-alarm = Some smoke/heat but below fire threshold
these warnings will appear and disappear
Evacuate
Supervisor
FRE off
Supervisor
FRE off
This will activate ALL sounders
and activate all panel relays
Do you wish to continue?
Yes
No
To Next Page
Loading...
