Eaton FX6100 - Faults; Enable;disable (others menu)

43INSTALLATION AND OPERATION MANUAL 25-16329-B December 2019 www.eaton.com
Section 3: Panel controls & indicators
Faults
Enter Supervisor Mode Passcode and select “Faults” tab.
Enable/disable (others menu)
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode passcode and select the “Others” tab.
Evacuate
Silence
Alarms
Reset
Supervisor
FRE Off
Pre-alarm = Some smoke /heat but below fire threshold
These warnings will appear and disappear
Mute
Buzzer
Others
Fires
AC = 0
Pre
Alarms
Disabled
Faults
Evacuate
Silence
Alarms
Mute
Buzzer
Reset
Supervisor
FRE Off
View Fires
Enable/Disable
Lamp Test
Print
View Pre
Alarms
View
Disabled
View
Faults
Others
AC=100
Weekly Test
Send analogue values to PC
View Log
Send Log to PC
Check Config.