Eaton IQ 100 series User Manual

IQ 100 Series (130/140/150)
Meter User & Installation Manual
IM02601003E
Rev D

Eaton IQ 100 series Specifications

General

Display	LCD
Mounting	Panel mount
Frequency	50/60 Hz
Enclosure Type	NEMA 1
Communication	Modbus RTU
Standards	UL

Summary

IQ 100 Series Meter Overview and Specifications

Ordering Information

Utility Peak Demand (IQ140/150)

Specifications

Detailed technical specifications including power, inputs, and outputs.

Communication Format

Compliance

Accuracy

Meter accuracy specifications for various parameters.

IQ 100 Series Mechanical Installation

Introduction

ANSI Installation Steps

Step-by-step guide for ANSI mounting.

DIN Installation Steps

Step-by-step guide for DIN rail mounting.

IQ 100 Series Transducer Installation

IQ 100 Series Electrical Installation

Considerations When Installing Meters

Safety and general precautions for meter installation.

CT Leads Terminated to Meter

CT Leads Pass-Through (No Meter Termination)

Quick Connect Crimp CT Terminations

Voltage and Power Supply Connections

How to connect voltage and power inputs to the meter.

Electrical Connection Diagrams

1. Service: WYE, 4-Wire with No PTs, 3 CTs

2. Service: 2.5 Element WYE, 4-Wire with No PTs, 3 CTs

3. Service: WYE, 4-Wire with 3 PTs, 3 CTs

4. Service: 2.5 Element WYE, 4-Wire with 2 PTs, 3 CTs

5. Service: Delta, 3-Wire with No PTs, 2 CTs

6. Service: Delta, 3-Wire with 2 PTs, 2 CTs

7. Service: Delta, 3-Wire with 2 PTs, 3 CTs

8. Service: Current Only Measurement (Three Phase)

9. Service: Current Only Measurement (Dual Phase)

10. Service: Current Only Measurement (Single Phase)

IQ 100 Series Communication Installation

RS485 / KYZ Output (Communication Option)

Details on the optional RS485/KYZ Pulse Output communication port.

For All RS485 Connections

General guidelines and requirements for RS485 connections.

IQ 100 Series Transducer Communication Information

Programming the IQ 100 Series Meter Using the Front Panel

Understanding Meter Face Elements

Understanding Meter Face Buttons

Using the Front Panel

How to navigate the meter's interface and modes.

Using the Main Menu

How to access and navigate the main menu.

Using Reset Mode

How to reset meter values and energy accumulators.

Entering a Password

Procedure for entering passwords for protected functions.

Using Configuration Mode

How to access and use the configuration mode.

Configuring the Scroll Feature

Configuring CT Setting

Setting Current Transformer ratios and scaling.

Configuring PT Setting

Setting Potential Transformer ratios and scaling.

Configuring Connection Setting

Setting the system wiring configuration.

Configuring Communication Port Setting

Setting communication port parameters like address and protocol.

Using Operating Mode

Understanding the % of Load Bar

Performing Watt-Hour Accuracy Testing (Verification)

Procedure for performing accuracy verification tests.

Programming the IQ 100 Series Meter Using Software

Overview

Connecting to the IQ 100 Series Meter/Transducer

Steps to connect the Eaton Meter Configuration Software.

Accessing the IQ 100 Series Device Profile

How to open and navigate the device profile screen.

Performing Device Profile Tasks

Tasks like updating, loading, and saving device profiles.

Configuring Settings

Configuring Scaling

Setting CT/PT ratios and system wiring.

Configuring Energy and Display Settings

Settings for power and energy display formats.

Configuring Communication Settings

Setting communication parameters for the RS485 port.

Configuring (System) Settings

Setting meter password and designation.

Polling the IQ 100 Series Meter

Viewing real-time data and circuit measurements.

Poll Power and Demand

Poll Phasors

Using the IQ 100 Series Tools Menu

Accessing meter configuration tools via the software menu.

Reset Device Information

Resetting meter data like Max/Min values.

Retrieve Device Status

Flash Update Firmware

Procedure for updating meter firmware.

Performing Additional Tasks with Eaton Meter Configuration Software

Using Connection Manager

Managing connection locations and devices.

To Edit a Device

Editing properties of a connected device.

To Edit a Location

To Connect to a Location

Establishing a connection to a selected location.

Disconnecting from an IQ 100 Series meter

Ending a connection to the meter.

Changing the Primary Device/Address

Using the Options Screen

App. A: IQ 100 Series Navigation Maps

Main Menu Screens (Sheet 1)

Operating Mode Screens (Sheet 2)

Reset Mode Screens (Sheet 3)

Navigation map for the reset mode screens.

Configuration Mode Screens (Sheet 4)

Navigation map for the configuration mode screens.

Modbus Address

Meter Data Section

Registers containing meter readings.

Primary Readings Block

Registers for primary readings.

Primary Energy Block

Registers for energy readings.

Primary Demand Block

Registers for demand readings.

Primary Minimum Block

Primary Maximum Block

Phase Angle Block

Status Block

Resets Block

Meter Programming Block

Registers for programming and update commands.

Basic Setups Block

Registers for basic setup configurations like CT/PT.

Programmable Settings Section

Registers for various programmable settings.

12-Bit RTU Readings Section

CT multiplier

CT denominator

PT numerator

PT multiplier

PT denominator

W-hours, Positive

W-hours, Negative

VAR-hours, Positive

VAR-hours, Negative

VA-hours

Neutral Current

Reset Energy Accumulators

Notes