Eaton MTL 9492-PS-PLUS - Environmental; Waste Removal Information; Approvals

16
INM MTL 9492-PS-PLUS Rev 2
5 ENVIRONMENTAL
Operating Temperature -40°C…+70°C
Storage Temperature –40°C…+70°C
Humidity 5…95% RH, non condensing
6 WASTE REMOVAL INFORMATION
The electronic equipment within must not be treated as general waste. By
ensuring that this product is disposed of correctly you will be helping to prevent
potentially negative consequences for the environment and human health,
which could otherwise be caused by incorrect waste handling of this product.
For more detailed information about the take-back and recycling contact MTL
product line.
7 APPROVALS
The operating parameters must not exceed those as detailed on the certificate.
• 2014/30/EU EMC Directive
• 2014/35/EU Low Voltage Directive
Region Europe (ATEX) / UK (UKEX) International IECEx
Authority CML CML
Standard EN 60079-0:2018
EN 60079-11:2012
EN 60079-26:2006
IEC 60079-0:2017
IEC 6 0079 -11:2011
IEC 60079-26:2006*
Approved
for
II (1), (2)GD
[Ex ia Ga] IIB, [Ex ib Gb] IIB
[Ex ia Da] IIIC, [Ex ib Db] IIIC
I (M1), (M2)
[Ex ia Ma] I, [Ex ib Mb] I
Ta = -40°C to +70°C
[Ex ia Ga] IIB, [Ex ib Gb] IIB
[Ex ia Da] IIIC, [Ex ib Db] IIIC
[Ex ia Ma] I, [Ex ib Mb] I
Ta = -40°C to +70°C
Cert. no. CML 15ATEX 2071X
CML 21UKEX21069X
IECEx CML 15.0034X
IECEx TRA 17.0003X (QLD)
Standard EN 60079-0:2018
EN 60079-15:2010
IEC 60079-0:2017
IEC 60079-15:2010
Approved
for
II 3G
Ex nA IIB T4 Gc
(Ta = -40°C to +70°C)
Ex nA IIB T4 Gc
(Ta = -40°C to +70°C)
Cert. no. CML 15ATEX4072X
CML 21UKEX41070X
IECEx CML 15.0034X
* (for guidance on marking)
Notes
1. Terminals 1 and 3
2. Terminals 5 and 6