iii
INM MTL 9492-PS-PLUS Rev 2
CONTENTS
DECLARATION OF CONFORMITY ................................................II
GENERAL SAFETY INFORMATION .............................................. IV
1 FEATURES ...................................................................1
2 DESCRIPTION ..............................................................1/2
3 DIN-RAIL INSTALLATION METHOD ...............................................3
3.1 Protection of equipment ......................................................................3
3.2 DIN rail mounting ............................................................................3
3.2.1 Mounting power supplies on DIN rail .......................................................4
3.2.2 Wiring up power supplies .................................................................4
3.2.3 Ambient temperature considerations .......................................................5
3.3 Power bus - Installation and use ................................................................5
3.4 Earth rail and tagging accessories ..............................................................6
3.4.1 Parts list ...............................................................................6
3.5 Assembly ...................................................................................8
3.5.1 Fitting earth rails ........................................................................8
3.5.2 Fitting tagging strips .....................................................................8
3.5.3 Completed assemblies ...................................................................9
4 BACKPLANE MOUNTING VARIANT ..............................................10
4.1 Accessories ................................................................................10
4.2 Protection of equipment .....................................................................10
4.3 Backplane mounting ........................................................................10
4.3.1 Surface mounting – with kit SMS01 .......................................................12
4.3.2 T- or G-section DIN-rail mounting –with kit DMK01 ...........................................12
4.4 Backplanes – identification and tagging ........................................................12
4.4.1 Backplane identification labels ............................................................12
4.4.2 Tagging strip mounting kit (TSK08) ........................................................12
4.5 Backplanes - earth rails ......................................................................14
4.5.1 Earth rail kit (ERK08) ....................................................................14
4.6 Backplanes – power supply connections ........................................................14
4.6.1 Single backplane .......................................................................14
4.6.2 Interconnection of power supplies for multiple backplanes ....................................14
4.7 Fitting MTL 9492-PS-PLUS modules to backplane ................................................14
4.7.1 Installation - Figure 4.15 ..................................................................14
4.7.2 Module removal - Figure 4.16 .............................................................14
5 ENVIRONMENTAL ............................................................16
6 WASTE REMOVAL INFORMATION ...............................................16
7 APPROVALS .................................................................16
8 ATEX, UKEX & IECEX CERTIFICATION INFORMATION ...........................17/18
To Next Page
Loading...
