Eaton MTL83*C Modbus User Manual

31
INM MTL83xC PC Modbus Rev 4
The Ethernet port is configured using the blue Configure Ethernet button, or with the Device/
Configure Ethernet menu item. Selecting either of these causes the screen to change to:
The Ethernet port can only be configured during power up, so at this point we are being instructed to
power the unit off and then back on. If you wish to exit the Configure Ethernet mode, you can click
the “X” in the upper right of the center window.
Powering the unit off and back on results in the following:

Eaton MTL83*C Modbus Specifications

General

Brand	Eaton
Model	MTL83*C Modbus
Category	Transmitter
Language	English