Eaton PRC-E Series User Manual

45
Web page programming
PRC-E Series Instruction Manual MN014003EN August 2015 www.eaton.com
Digital Switch configuration
Pow-R-Command Digital Switches are programmable
devices that have onboard I/O to receive inputs from
occupancy sensor and photo sensors, and an analog
output to control 0–10 V dimmable ballasts and LED
drivers. See the “Digital Switch” section on page 81 for
more information.
The “Digital Switches” screen displays a list to the DSN
devices connected to the controller.
In the “Main Menu” screen, tap the “Digital Switches”
icon.
This will display the “Digital Switches” screen.
This Screen displays the PRC Digital Switch Information
only.
The number “#” is the unique Digital Switch address. The
address range is 1 to 99.
The switch “Description” is an alphanumeric description of
the switch.
The Version” is the firmware version of the PRC Digital
Switch.
The “Type” is the number of buttons on the switch. The
types available are 2-button (2-B), 4-button (4-B), and
6-button (6-B).

Eaton PRC-E Series Specifications

General

Brand	Eaton
Model	PRC-E Series
Category	Control Unit
Language	English