Eaton Form 6 - User Manual

Form 6 microprocessor-based rack-mount recloser control
installation and operation instructions
COOPER POWER
SERIES
Reclosers
MN280075EN
Effective July 2018
Supersedes May 2017
For type F6-R2 controls above serial number 20,000 or beginning with CP57.
COOPER POWER
SERIES
F6 Recloser Control

Eaton Form 6 Specifications

General

Type	Control Unit
Series	Form 6
Output Voltage	24 VDC
Display	LCD
Voltage Rating	600V
Communication Protocol	Modbus RTU
Standards Compliance	UL, CSA, IEC

Summary

Safety for Life

Safety Information

Instructions and qualifications for competent technicians.

Safety Instructions

General caution and warning statements for equipment safety.

Control Front Panel and Interface

Programming Panel Functions

One-Touch Function Keys

Control Features and Functions

Core Protection Features

Advanced Functions and Monitoring

Installation and Connections

Installation Procedure Overview

General steps and considerations for installing the recloser control.

Mounting the Control

Grounding the Control

Critical procedures for properly grounding the recloser control.

Customer Connections

Wiring details for DC power input and AC voltage sensing.

Recloser Connections and Accessories

Communication Board Accessories

Testing Procedures

Installed Control Testing Steps

Verifying indicator lights, metering values, and control status while connected.

Removing Control from Service

Procedure for safely disconnecting the control for testing or servicing.

MET Tester and Recloser Closing Tests

Using MET tester and procedures for closing reclosers during testing.

Return to Service

Reconnecting and Verifying Settings

Procedure for safely reconnecting and restoring the control to operation.