Eaton PRC-E Series - Page 67

63
Web page programming
PRC-E Series Instruction Manual MN014003EN August 2015 www.eaton.com
Once in the “Edit Schedule” screen, the “Action” line has a
dropdown list that has an “On” command for each group.
To use this feature, click the dropdown arrow beside the
“Action” textbox.
This will open the groups dropdown list.
Click to choose the group to turn On.
If the “Action” command needs to be manually entered,
click the “Action” textbox.
This opens it for edit.
Type in your command. For example, “GRPF OFF”. This
example command will turn group “F” OFF at the “From”
time then back ON at the “Until” time. Another example
is “B101 ON”. This example will turn On any circuit breaker
with the name B101 at the “From” time and turn it Off at
the “Until” time.
Fixed date schedule entry
A “Fixed Date” schedule is a schedule that will operate only
during one single date.
ote:N Since the “Fixed Date” schedule has only month
and day specified, it will activate every year on the
same date. The care must be taken managing these
schedules on the yearly basis.
To create a “Fixed Date” schedule, click the “Fixed Date”
radio button.
Click the entry textbox.
Enter the Date in the “MM/DD/YY” format.
OR
Click the calendar tool icon.
This will open the calendar tool.
Use the left/right arrows to navigate through the months.
Click to choose the date required.