Eaton TRIPP LITE Series - Special Symbols; Battery Warning Instructions

3
Notes:
• Beforecharginganydevices,rstchargethewirelesspowerbankto
100%capacity
• Whenchargingthepowerbank,theLEDswillilluminatetoindicatethe
followingbatterycapacitylevels:
LED Status Power Bank Battery Capacity
●●●●
75% to 100%
●●●○
50% to 75%
●●○○
25% to 50%
●○○○
5% to 25%
○○○
1% to 5%
○○○○
0%
● = LED Illuminated
○ = LED O
= LED Flashing
1. Using the included USB 2.0 Type-C to Type-A cable, connect
the USB-C port on the power bank to an appropriate USB-A
port on your computer or USB wall charger.
2. The power bank will begin charging with the LEDs operating
per the above notes and table.
Power Bank Charging