To Next PageTo Next Page
Need help?Do you have a question about the Eaton Tripp Lite SmartOnline Series and is the answer not in the manual?
General| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
|---|---|
| Dimensions | Varies by model |
| Model Series | SmartOnline |
| Output Power Capacity | Varies by model |
| Output Voltage | Varies by model (typically 120V or 208/240V) |
| Input Voltage | Varies by model (typically 120V or 208/240V) |
| Input Voltage Range | Varies by model |
| Frequency | 50/60 Hz |
| Efficiency | Varies by model |
| Waveform | Sine wave |
| Battery Type | Sealed Lead Acid (SLA) |
| Typical Recharge Time | Varies by model |
| Communication Ports | USB, RS-232 |
| Display | LCD |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Relative Humidity | 0% to 95% non-condensing |
| Altitude | 0 to 3000 meters (0 to 10, 000 feet) |
| Audible Noise | Varies by model |
| Weight | Varies by model |
| Certifications | UL, cUL, CE, RoHS |
| Type | Online Double Conversion |
Introduces the UPS and the manual's purpose.
Details the company's environmental policy and product eco-design.
Provides information on standard installation methods and physical dimensions.
Illustrates and labels the rear panel connectors and ports of various UPS models.
Guide to checking equipment for damage during shipment and filing claims.
Lists and illustrates the included accessories for the UPS.
Step-by-step guide for connecting the internal batteries to the UPS.
Instructions for installing the UPS unit in a tower configuration.
Instructions for mounting the UPS unit in a rack configuration.
Guide for installing external battery packs in a rackmount configuration.
Instructions for installing UPS and external battery packs in a tower configuration.
Details how to connect external battery packs in a tower configuration.
Explains the UPS front panel controls, buttons, and indicators.
Details the UPS LCD screen, its lines, characters, and status messages.
Describes the UPS Home Menu, its default display, and navigation.
Explains how to navigate and use the display menus for various functions.
Details user-configurable settings for the UPS, including language and alarms.
Explains how to connect the UPS to a computer via RS232 or USB ports.
Covers programmable signal inputs for remote control of the UPS.
Describes available connectivity cards like the Network card for remote management.
Information about the PowerAlert software suite for UPS monitoring and control.
Outlines Eaton's commitment to cybersecurity in their products.
Guide to starting the UPS and its normal operating status.
Explains how the UPS behaves when AC power is restored after an outage.
Instructions on how to enable and configure the UPS's High Efficiency mode.
Details how to configure automatic battery tests and low battery warnings.
Instructions for accessing and viewing the UPS event log through the display.
Guidelines for maintaining the UPS equipment and optimal operating environment.
Recommendations for storing the UPS for extended periods.
Information on the expected lifespan of UPS batteries and when to replace them.
Detailed steps and safety precautions for replacing UPS batteries.
Procedure for testing newly installed UPS batteries.
Guidance on proper disposal and recycling of used UPS equipment and batteries.
Describes common UPS alarms, faults, their causes, and recommended actions.
Instructions on how to silence audible alarms on the UPS.
Provides contact information and necessary details for obtaining technical support or service.
Lists power ratings and configurations for different UPS and EBM models.
