Need help?Do you have a question about the Eaton 93PS and is the answer not in the manual?
General| Power Rating | 8-40 kW |
|---|---|
| Topology | Double conversion online |
| Frequency | 50/60 Hz |
| Form Factor | Tower |
| Parallel Capability | Yes, up to 4 units |
| Input Voltage | 380/400/415 V (3-phase) |
| Battery Type | VRLA |
| Operating Temperature | 0°C to 40°C |
| Communication Interface | USB, RS-232 |
| Efficiency | Up to 96% |
Explanation of hazard warning symbols used in the document for DANGER, WARNING, and CAUTION.
Details on hazard symbols and common symbols used to indicate hazardous situations or actions.
Defines typography conventions like bold, italic, and screen type for clarity.
List of acronyms used in Eaton documentation for UPS products and their parts.
Provides critical safety instructions for installation, operation, and maintenance of the UPS.
Identifies the intended audience of the manual and their expected knowledge.
Details the product's compliance with European directives and harmonized standards.
Specifies permitted user operations and warnings against unauthorized actions on the UPS.
Guidelines for installing the UPS in suitable environments and avoiding damaging conditions.
Explains symbols used on the UPS and accessories to alert users to important information.
Provides contact information for inquiries and references to relevant safety standards.
Overview of the Eaton 91PS/93PS UPS, its function, and benefits for critical loads.
Illustrations and descriptions of the internal components of the UPS frames.
Details on different operating modes like Double Conversion, ESS, Stored Energy, and Bypass.
Description of key features like Advanced Battery Management and Powerware Hot Sync.
Information on user interface, power management software, and communication bays.
Details on optional accessories like Maintenance Bypass Switch and Field Installed UPM.
Information on the UPS battery system, default configuration, and external options.
Tables outlining different UPS configurations based on frame size, power modules, and static switch.
Outlines the basic sequence of steps required for UPS system installation.
Guidance on how to create a logical plan for UPS system installation.
A checklist to ensure all installation requirements are met before startup.
Details environmental considerations and installation requirements for the UPS site.
Instructions and safety precautions for unpacking and unloading the UPS cabinet.
Overview of the UPS system installation process and required personnel.
Step-by-step guide for connecting power and control wiring to the UPS.
Instructions for installing internal and external battery systems, including safety warnings.
Guidance on connecting external battery cabinets and their power cabling.
Instructions for installing and connecting a remote Emergency Power-Off switch.
Details on connecting various signal inputs, outputs, and communication interfaces.
Instructions for wiring multiple UPS units in parallel for increased capacity or redundancy.
Guidelines for preparing and connecting control wiring for features and options.
Overview of the communication features and interfaces available on the UPS.
Description of native signal terminals like TB6, TB7, TB8, and TB1 for control and monitoring.
Information on available MiniSlot cards for expanding communication capabilities.
Details on productivity tools for UPS power management and remote monitoring.
How to connect external alarms like smoke detectors to the UPS signal inputs.
Information on the standard general purpose relay output for alarm notifications.
Step-by-step guide on how to configure relay outputs via the UPS display.
General precautions and information before operating the UPS system.
Description of the control panel, status indicators, and LED indicators on the UPS.
Procedure for signing into the UPS control interface using passwords.
Instructions for controlling the UPS system, including starting and transferring between modes.
Procedures for starting and shutting down a single UPS unit.
Instructions for starting and shutting down individual Uninterruptible Power Modules (UPMs).
How to use the EPO switch for emergency shutdown of the UPS and critical load.
Procedure for transitioning the UPS from double conversion mode to maintenance bypass mode.
Procedure for transitioning the UPS from maintenance bypass mode back to double conversion mode.
Overview of UPS maintenance requirements and the importance of periodic checks.
Critical safety warnings and precautions for personnel performing maintenance on the UPS.
Daily checks to ensure the UPS area is clear and operating environment is within limits.
Monthly checks of system parameters and optional air filters.
Periodic inspection of components, wiring, and connections for signs of overheating.
Annual preventive maintenance procedures performed by authorized personnel.
Maintenance procedures for batteries, to be performed by authorized personnel.
Guidelines for proper disposal and recycling of UPS units and batteries.
Information on obtaining maintenance training and other services from Eaton.
Information on obtaining complete technical specifications from Eaton.
List of relevant safety, EMC, performance, environmental, and regulatory standards.
Specifications for the UPS system's electrical input voltage, frequency, and current.
Specifications for the UPS system's electrical output voltage, frequency, and overload capability.
Details on operating and storage temperature, humidity, altitude, and acoustic noise levels.
Specifications for the UPS battery type, quantity, voltage, recharge profile, and charge current.
Details the product warranty period, limitations, and conditions for validity.
Information on who to contact for warranty claims and required information.
To Next Page
