Need help?Do you have a question about the Eaton 93PR Series and is the answer not in the manual?
General| Series | 93PR |
|---|---|
| Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Humidity | 0 to 95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Type | UPS |
| Input Voltage | 380/400/415 V (3-phase + N + PE) |
| Output Voltage | 380/400/415 V (3-phase + N + PE) |
| Battery Type | Valve-Regulated Lead-Acid (VRLA) |
| Communication Interface | RS-232, USB, Ethernet, Modbus, SNMP |
| Form Factor | Tower |
Crucial safety information for installation, maintenance, and operation of the UPS.
Contains warnings about lethal voltages and electrical hazards.
Provides cautionary advice for installation, servicing, and handling of batteries.
Details environmental and installation requirements for peak UPS efficiency.
Specifies conditions for air duct inlet and precautions for microclimate.
Covers precautions and specifications for UPS power supply and external wiring.
Details external control communication line connections to the UPS interface.
Guides on inspecting and safely unpacking the heavy UPS cabinet.
Covers mechanical installation and cable management for the UPS system.
Instructions for mechanical installation of the UPS cabinet.
Details how to route and connect power and control signal cables.
Provides instructions and warnings for connecting external battery cabinets.
Details wiring requirements for parallel UPS systems, including CAN communication.
Details the wiring of parallel control signals via RJ45 ports.
Instructions for accessing and using system control functions via password.
Guides on operating the UPS system, including startup and mode switching.
Step-by-step instructions to start the UPS in Online mode.
Instructions for starting the UPS in Bypass mode, with caution.
Procedure to switch the UPS load from Online mode to Bypass mode.
Procedure to switch the UPS load from Bypass mode to Online mode.
Procedure to switch the UPS from Online mode to ESS mode.
Procedure to switch the UPS from ESS mode back to Online mode.
Steps for performing a UPS system shutdown with the 'LOAD OFF' command.
Instructions for starting up a single UPS unit.
Procedure for shutting down a single UPS unit.
Essential safety notes for performing UPS maintenance.
Guidance on performing regular inspection and maintenance for UPS.
To Next Page
