Need help?Do you have a question about the Eaton 93PM UPS and is the answer not in the manual?
General| Topology | Double conversion online |
|---|---|
| Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Efficiency | Up to 97% in double conversion mode |
| Input Voltage | 208/220/400/480V |
| Output Voltage | 208, 220, 380, 400, 415, 480 V (depending on model) |
| Battery Type | VRLA |
| Form Factor | Tower |
| Power Factor | 0.9 |
| Relative Humidity | 0% to 95% non-condensing |
| Communication Ports | USB, RS232, SNMP |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Storage Temperature | -15 to 50 °C (5 to 122 °F) |
| Audible Noise | <65 dB at 1 meter |
Overview of the UPS's standard features for cost-effective and reliable power protection.
Details on line-up-and-match, standalone configurations, and wiring capabilities.
Description of the control panel with touch screen LCD and LED indicators for UPS operation.
Information on building alarm monitoring, alarm contacts, and communication bays.
Explanation of the ESS mode for maximizing efficiency by eliminating power conversion.
Details on how the UPS can be configured for internal redundancy for greater reliability.
Explanation of ABM technology for extending UPS battery life and performing tests.
Overview of available options and accessories for the UPS system.
Information on using IBCs for additional battery backup and runtime.
Details on the SIAC-B for providing maintenance bypass functions.
Explanation of parallel UPS systems for increased capacity and redundancy.
Information on Minislot cards and Remote Monitoring Device (RMD).
Details on the battery system, including internal and external configurations.
Description of available battery system configurations for the UPS.
Guidance on how to read and use the manual for installation and operation.
Explanation of symbols, controls, and indicators used on the UPS.
Important safety instructions and warnings for UPS installation and operation.
Warning about lethal voltages inside the UPS and service restrictions.
General warnings regarding power, environment, and battery handling.
Cautions for installation, servicing, and battery handling.
Procedure for creating a logical installation plan for the UPS system.
Guidelines for preparing the installation site for the UPS system.
Operating restrictions and guidelines for the UPS installation environment.
Notes and requirements for preparing UPS system power wiring.
Notes for planning and performing external parallel UPS installation wiring.
Instructions for preparing control wiring for UPS features and options.
Steps for inspecting and safely unpacking the UPS cabinets.
Important information and references for installing the UPS system.
Detailed steps for safely unloading the heavy UPS cabinet from its pallet.
Instructions for installing Integrated Battery Cabinets (IBCs).
Step-by-step instructions for installing external AC power wiring.
Procedure for routing and connecting battery cables between UPS and battery cabinet.
Procedures for connecting customer and battery interface connections.
Steps for connecting building alarm and relay output interface wiring.
Instructions for wiring battery detect and shunt trip connections.
Procedure for routing and connecting external parallel CAN control wiring.
Steps for routing and connecting external parallel pull chain control wiring.
Guidance for installing Minislot card interface connections.
Instructions for installing a Remote Emergency Power-off (REPO) switch.
Final step to ensure all installation tasks are completed before system startup.
Description of the Eaton 93PM UPS as an online system with its main components.
Explanation of how a single UPS operates independently to support a load.
Overview of the four standard operating modes: ESS, Normal, Bypass, and Battery.
Detailed explanation of the high-efficiency Energy Saver System (ESS) mode.
Description of the UPS operating in Normal (double-conversion) mode.
Explanation of the Bypass mode and its implications for load protection.
Description of the UPS operating in Battery mode during utility power interruption.
Oneline drawings showing internal structure of UPS, battery, and bypass.
Description of controls and indicators used to set up, control, and monitor the UPS.
Details of the UPS control panel, including its functions.
How to use the UPS control panel, including controls, indicators, and monitoring.
Explanation of the four status indicators (LEDs) and their meanings.
Information on how system events are indicated via horns, lights, and messages.
Guide to navigating and using the UPS LCD touch screen interface.
Explanation of the UPS navigation tab menu structure.
Description of the Mimic screen showing UPS internal components and status.
Detailed description of how to use each menu function and subfunction.
Procedure for signing in to access restricted Controls and Settings screens.
How to use system controls for operation, transfer, and charger commands.
Detailed procedures for operating a single UPS unit.
Step-by-step guide to starting the UPS system in Double Conversion mode.
Procedure to energize the critical load using Bypass mode when inverter is unavailable.
Procedure to transfer the critical load from Double Conversion to Bypass mode.
Procedure to transfer the critical load back to Normal mode from Bypass.
Steps to shut down the UPS and critical load for maintenance or service.
Procedure to shut down the UPS output and de-energize the critical load.
Instructions for using the REPO switch for emergency UPS output control.
Procedures for operating UPS systems in a multiple external parallel configuration.
Steps to start the parallel UPS system in Double Conversion mode.
Procedure to start the parallel UPS system in Bypass mode.
Instructions on how to shut down a single UPS in a parallel system.
Steps to shut down the parallel UPS system and critical load for maintenance.
Procedure for using the LOAD OFF command to shut down UPSs.
Instructions for using the REPO switch in emergencies for UPS shutdown.
Information on the four standard Minislot communication bays and compatible cards.
Overview of the PredictPulse subscription service for UPS monitoring.
Details on the features of the PredictPulse service, including monitoring and reporting.
Crucial safety instructions for UPS and battery maintenance.
Guidelines for periodic inspection and maintenance of UPS units and batteries.
Daily checks for the UPS system area, air intakes, and operating environment.
Monthly tasks including monitoring system parameters and checking air filters.
Information regarding battery maintenance and replacement by authorized personnel.
Guidance on proper disposal and recycling of used batteries and UPS equipment.
List of available Eaton 93PM UPS model numbers and their power ratings.
Detailed input, output, environmental, and battery specifications for the UPS.
Details on operating input voltage, frequency range, current, and power factor.
Details on UPS output capacity, voltage regulation, harmonic content, and current.
Information on operating temperature, altitude, humidity, and noise levels.
Details of the limited factory warranty for the UPS and accessory products.
Scope of coverage for defects in material and workmanship of Warranted Items.
Information on the duration of the warranty period for labor and parts.
Exclusions from warranty coverage, including damages from misuse or unauthorized repair.
Contact information and procedures for obtaining warranty service.
To Next Page
