Need help?Do you have a question about the Eaton 9130 UPS and is the answer not in the manual?
General| Transfer Time | 0 ms |
|---|---|
| Waveform Type | Sine wave |
| Output Voltage | 200/208/220/230/240V |
| Input Voltage Range | 160-294V (adjustable to 140-300V) |
| Frequency Range | 50/60 Hz ± 3 Hz (auto sensing) |
| Efficiency | Up to 95% |
| Form Factor | Rack/Tower Convertible |
| Battery Type | Sealed, lead-acid |
| Communication Interface | USB, RS-232, Relay |
| Typical Recharge Time | 3 hours |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Relative Humidity | 0% to 95% (non-condensing) |
| Safety Approvals | UL, cUL, CE |
Key instructions for UPS installation and maintenance.
Warning about lethal voltages within the UPS.
Risks of fire, electric shock, and environmental factors.
Precautions regarding battery hazards.
Hardware and steps for installing UPS in a rack.
Procedures for powering on the UPS.
Explanation of UPS front panel buttons and indicators.
Configuring various UPS operational parameters.
Indicators and procedures for battery replacement.
Details on communication, models, dimensions, electricals, safety.
Identifying and diagnosing common UPS alarms.
Contact information and procedures for technical support.
Terms and conditions of the limited warranty.
Details of the load protection guarantee.
To Next Page
