Need help?Do you have a question about the Eaton 9130 Series and is the answer not in the manual?
General| Output Power Factor | 0.9 |
|---|---|
| Transfer Time | 0 ms |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Rating | 700 VA - 6000 VA |
| Topology | Double Conversion Online |
| Input Voltage Range | 160-276V |
| Efficiency | Up to 95% |
| Form Factor | Tower/Rackmount |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | USB, RS-232, Relay |
| Output Voltage | 230V |
| Output Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15-45°C |
| Humidity | 0-95% (non-condensing) |
| Warranty | 2 years |
| Typical Backup Time | 5-20 minutes depending on load |
Explains the document's goal and where to find available firmware updates and software tools.
Concise, step-by-step instructions for upgrading the main DSP firmware using an RS-232 connection.
Lists essential hardware, software, and specific files required to perform the firmware upgrade process.
Detailed procedure for successfully performing a standard firmware upgrade using the RS-232 communication method.
Guidance on resolving firmware upgrade failures or handling 'Flash firmware NG!' messages during the process.
To Next Page
