Need help?Do you have a question about the Eaton Powerware 9125 and is the answer not in the manual?
General| Output Waveform | Sine wave |
|---|---|
| Topology | Double conversion online |
| Frequency | 50/60 Hz |
| Transfer Time | 0 ms |
| Battery Type | Sealed lead-acid (maintenance-free) |
| Battery Runtime | Varies by load |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Communication | RS-232, USB |
| Form Factor | Tower |
Procedure to turn on the UPS using the front panel button.
Procedure to start the UPS without utility power using the On button.
Procedure to inspect the UPS for shipping damage and file claims.
Steps to properly connect the UPS internal battery.
Instructions for installing the UPS in a rack-mount configuration.
Instructions for installing the UPS in a tower configuration.
Final steps to install the UPS and optional EBMs, including connections.
Procedure to install a remote emergency power-off (REPO) switch.
Diagrams and descriptions of the UPS rear panel connectors.
Procedure to turn on the UPS via the front panel button.
Procedure to start the UPS without utility power using the On button.
Steps to properly shut down and turn off the UPS.
How to perform a UPS self-test to check battery health.
Describes X-Slot cards for networking and communication.
Connects the UPS to a PC for power management control.
Connects the UPS to a computer via a USB port.
Details the function and connection of the network transient protector.
Explains load segments and their control via power management software.
Guidelines for maintaining the UPS and batteries for optimal performance.
Indicator for when UPS batteries may need replacement.
Procedures for safely replacing UPS batteries.
Step-by-step guide for replacing the internal UPS batteries.
Instructions for replacing Extended Battery Modules (EBMs).
How to perform a self-test on new UPS batteries.
Information on proper disposal and recycling of UPS and batteries.
Lists the available Powerware UPS models and their variants.
Provides physical dimensions and weight for UPS and EBM.
Details the electrical input specifications for 120V and 230V models.
Details the electrical output specifications, including power levels and receptacles.
Specifies operating temperature, humidity, and safety conformance.
Information on UPS and EBM battery configuration, type, and charging.
Explains audible alarms and their corresponding conditions.
Procedure to silence audible alarms on the UPS.
Contact information and procedures for obtaining technical support.
Details the terms and conditions of the two-year limited warranty.
Outlines the terms of the ten-year pro-rated limited warranty.
Explains the load protection guarantee offered by the manufacturer.
To Next Page
