Eaton Powerware 9125 - Single-Port Card; USB Card

ADDITIONAL UPS FEATURES
EATON Powerware
®
9125 Two-in-One UPS (700–2000 VA) User’s Guide S 164201514 Rev B www.powerware.com
42
Relay Interface Card
Multi-Server Card
X-Slot Communication Bay
(Single-Port Card shown)
USB Card
ConnectUPS-X Web/SNMP Card
Modbus Card
Figure 22. Optional X-Slot Cards
Single-Port Card
To establish communication between the UPS and a computer, connect
your computer to the UPS communication port using the supplied
communication cable.
When the communication cable is installed, power management
software can exchange data with the UPS. The software polls the UPS
for detailed information on the status of the power environment. If a
power emergency occurs, the software initiates the saving of all data
and an orderly shutdown of the equipment.
The cable pins are identified in Figure 23 and the pin functions are
described in Table 2.
3
8
7
9
1
6
245
Figure 23. Communication Port