Need help?Do you have a question about the Eaton Powerware 9170+ and is the answer not in the manual?
General| Topology | Double Conversion Online |
|---|---|
| Input Voltage | 208/220/230/240 VAC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 208/220/230/240 VAC |
| Communication | RS-232 |
| Dimensions (H x W x D) | Varies depending on configuration |
| Weight | Varies depending on configuration |
| Output Waveform | Pure Sine Wave |
| Typical Backup Time | Varies depending on load and battery configuration |
Provides essential safety instructions for installation and maintenance of the UPS and batteries.
Specifies required clearances around all cabinet sizes for servicing and ventilation.
Details optimal placement of the UPS near equipment or distribution panels.
Describes the two types of bypass switches (MBB and BBM) and their positions.
Provides step-by-step instructions for installing the UPS with an external bypass switch.
Specifies required input circuit breaker sizes for hardwired installations.
Details the process of electrically installing the UPS without an external bypass switch.
Explains the requirement and procedure for neutral-to-ground bonding in isolated output systems.
Provides instructions for installing power and battery modules into the UPS cabinet.
Outlines recommended preventive maintenance checks for the UPS system.
Provides a step-by-step guide for replacing battery modules without load disconnection.
Explains the procedure for replacing power modules using the hot-swap feature.
Explains how alarms are indicated and how to interpret detailed alarm entries.
To Next Page