Need help?Do you have a question about the Eaton Powerware 9155 and is the answer not in the manual?
Optional module for UPS maintenance and servicing.
Provides neutral from 208V/240V input source with 240V output.
Secures UPS and EBMs for Zone 4 seismic installations.
Lethal voltages present; service by authorized personnel only.
UPS has own energy source (batteries); potential for electric shock.
Batteries present risk of shock/burn; handle with care.
Check for damage during shipment and file claims.
Consider UPS weight for floor loading capacity.
Recommended working space around the UPS unit.
Choose installation based on UPS configuration.
Steps for connecting the UPS via hardwiring.
Wiring details for input and output terminals.
Steps for connecting the transformer and UPS.
Attaching the Maintenance Bypass Module or Power Distribution Module.
Steps for hardwiring the MBM/PDM.
Preparing the wall-mounted bypass switch cabinet.
Steps for hardwiring the wall-mounted bypass switch.
Instructions for securing cabinets using stabilizing brackets.
Procedure for connecting EBMs to the UPS.
Procedures for installing communication hardware.
Details on serial ports and X-Slot cards for communication.
Feature to shut down the UPS from a distance.
Overview of the UPS control panel and indicators.
User-configurable options for the UPS.
Procedures for starting the UPS in various modes.
Steps for safely shutting down the UPS.
Guidelines for keeping the UPS and batteries clean and operational.
Requirements for storing the UPS and batteries.
How to use the bypass switch for maintenance.
List of available UPS and EBM models with power ratings.
Physical dimensions and weight of UPS and EBM units.
Input/output voltage, frequency, power factor, and regulation.
Estimated battery backup times at full load.
Common UPS alarms and their possible causes/actions.
Contact information for technical assistance.
Terms and conditions of the limited product warranty.
Guaranty against AC power line surge damage.
To Next Page
General