Eaton Powerware 9155 - Communication

EATON Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev F www.powerware.com
49
Chapter 10 Communication
This section describes the:
S DB-9 communication port
S X-Slot cards
S Powerware LanSafe
®
Power Management Software
S Remote emergency power-off (REPO)
S Relay output contacts
S Programmable signal inputs
Figure 36 shows the location of the communication options and control terminals on
the UPS.
1
2
1
2
1
2
1
2
1
2
3
DB-9 Communication Port
REPO (normally closed)
REPO (normally open)
Signal Input 2
Signal Input 1
X-Slot Communication Bay #2
X-Slot Communication Bay #1
Relay Output Contacts
Figure 36. Communication Options and Control Terminals