Need help?Do you have a question about the Eaton Powerware 9170+ UPS 3–18 kVA and is the answer not in the manual?
General| Relative Humidity | 0-95% non-condensing |
|---|---|
| Power Rating | 3 kVA - 18 kVA |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Battery Type | Sealed Lead-Acid (VRLA) |
| Communication Ports | RS-232, Relay Contacts |
| Form Factor | Tower |
| Operating Temperature | 0°C to 40°C |
Important safety instructions for installation and maintenance of the UPS and batteries.
Details on bypass switch types, positions, and operational procedures.
Wiring diagrams for various UPS input and output voltage configurations.
Wiring diagrams specific to installations with galvanically isolated UPS output.
Procedure for installing power and battery modules into the UPS cabinet.
Setting essential operating parameters upon first UPS power-on.
Explanation of the alphanumeric display, LEDs, and pushbuttons on the front panel.
Procedure for replacing hot-swappable battery modules without load interruption.
Procedure for replacing hot-swappable power modules without load interruption.
Answers to common questions regarding UPS operation and setup.
Descriptions and actions for critical alarm messages requiring immediate attention.
To Next Page