Need help?Do you have a question about the Eaton Powerware 9355 and is the answer not in the manual?
Critical safety warnings for operation and maintenance, including Danger, Warning, and Caution.
Procedures for checking equipment condition upon delivery.
Guidelines for determining floor weight capacity for UPS installation.
Recommended space requirements around the UPS unit for ventilation.
Step-by-step instructions for safely removing UPS cabinets from the shipping pallet.
Specific steps for unloading three-high cabinets or two-high EBMs.
Instructions for unloading two-high UPS cabinets from the shipping pallet.
Guide to choosing the correct installation chapter based on UPS configuration.
Crucial safety warning regarding qualified personnel for installation and startup.
Important note regarding the incompatibility of input isolation transformer with wall-mounted bypass.
Important note regarding the incompatibility of input isolation transformer with wall-mounted bypass.
Overview of available serial communication ports and X-Slot cards for UPS connectivity.
Details on connecting a computer to the UPS via the DB-9 serial port for monitoring.
Steps to access and install communication hardware and control terminals on the UPS.
Information on various X-Slot cards for networking and device communication.
Details on installing and using the Remote Monitor Panel for UPS status monitoring.
Description of the UPS control panel, including LCD and buttons for operation and settings.
Procedure for selecting the display language on the UPS control panel.
How the LCD displays information and how to navigate menus.
Configuration options adjustable by the user via the UPS control panel.
Overview of startup and operational checks required before using the UPS.
Instructions and options for starting up the UPS, emphasizing qualified personnel.
Step-by-step guide for starting the UPS in normal mode when the load is de-energized.
Procedure to start the UPS using battery power, even without utility input.
Steps to start the UPS when it is powered by its internal bypass.
How to start the UPS using its internal maintenance bypass.
Procedure for starting the UPS via a wall-mounted maintenance bypass.
Guide to configuring the UPS for Extended Battery Modules to maximize runtime.
Recommendations for maintaining the UPS and batteries for optimal performance and longevity.
Guidelines for proper storage of UPS and batteries to preserve their condition.
Indicators for battery replacement and recommended replacement intervals.
Information on proper disposal and recycling of used batteries and UPS units.
Instructions on how to use the UPS maintenance bypass switch for servicing.
Procedures for transferring load to and from the UPS using a wall-mounted bypass cabinet.
A list of available Eaton 9355 UPS and EBM models with their configurations.
Physical dimensions and weight specifications for different UPS and EBM configurations.
Operating environment parameters, safety standards, and certifications for the UPS.
Key technical parameters including voltage, frequency, power factor, and distortion.
Detailed electrical specifications for each 10 kVA and 15 kVA model variant.
Information on battery type, number of strings, charging, and performance features.
Estimated battery runtime at full load for various configurations and loads.
A guide to common UPS alarms, their causes, and recommended actions.
Procedure for silencing active UPS alarms after addressing the condition.
Contact information and required details for obtaining technical assistance and service.
Details of the limited factory warranty, coverage, and terms for Eaton 9355 UPS products.
To Next Page
General