Eaton Powerware 9355 - Installing Communication Options

Eaton 9355 UPS (10/15 kVA) User's Guide S 164201594 Rev D www.eaton.com/powerquality
63
Chapter 9 Communication
This section describes the:
S DB-9 communication port
S X-Slot cards
S Remote Monitor Panel and Industrial Relay Card (IRC)
S LanSafe
®
Power Management Software
S Remote emergency power-off (REPO)
S Relay output contacts
S Programmable signal inputs
Figure 46 shows the location of the communication options and control
terminals on the UPS.
1
2
1
2
1
2
1
2
1
2
3
DB-9 Communication Port
REPO (normally closed)
REPO (normally open)
Signal Input 2
Signal Input 1
X-Slot Communication Bay #2
X-Slot Communication Bay #1
Relay Output Contacts
Figure 46. Communication Options and Control Terminals