Need help?Do you have a question about the Eaton Powerware 5130 and is the answer not in the manual?
Overview of the Eaton 5130 UPS, its purpose, and protection capabilities.
Crucial instructions for safe installation and maintenance of the UPS.
Alerts to lethal voltages and requires authorized personnel for service.
Highlights potential hazards like output voltage and installation environment.
Warns about battery risks, proper disposal, and fire hazards.
Procedure for checking equipment for damage and included accessories.
Steps to connect the internal battery for proper operation.
Guidance on setting up the UPS, including rackmount, tower, and RPO/ROO installation.
Procedures for installing the UPS and connecting EBMs into the rack or tower.
Steps for powering the UPS on, off, and initiating startup.
Procedure to turn on the UPS without utility power using battery.
Explanation of different UPS operational states like Normal, Battery, and Standby.
Details on connecting and using the USB port for communication.
Information on the optional contact communication port and its pin assignments.
Explanation of programmable outlets for managing power to connected equipment.
Guide to modifying UPS settings using the configuration tool.
Recommendations for cleaning and maintaining the UPS and batteries.
Steps for safely disconnecting and preparing the UPS for transport.
Guidelines for proper storage and periodic recharging of the UPS and batteries.
Instructions for safely replacing UPS batteries.
Information on the proper disposal of used batteries and UPS units.
Explains UPS alarms and conditions using indicators and an audible alarm.
Contact information and procedures for obtaining technical support and service.
Details of the limited warranty coverage and extension terms for US and Canada.
Terms and conditions of the load protection guarantee provided by Eaton.
To Next Page
General