Need help?Do you have a question about the Eaton Powerware 5125 and is the answer not in the manual?
General| Topology | Line Interactive |
|---|---|
| Output Voltage | 230 V |
| Form Factor | Tower |
| Number of Outlets | 8 |
| Frequency | 50/60 Hz |
| Communication Interface | USB, Serial |
| Battery Type | Sealed Lead Acid |
| Dimensions (H x W x D) | 230 x 160 x 410 mm (9.1 x 6.3 x 16.1 in) |
| Weight | 16kg |
| Output Receptacles | NEMA 5-15R |
| Communication Ports | USB, Serial |
| Typical Recharge Time | 4 hours |
Crucial safety instructions and warnings covering electrical hazards, battery handling, and environmental precautions.
Instructions for safely installing the internal battery trays within the UPS chassis.
Guide for connecting optional Extended Battery Modules (EBMs) to the UPS unit.
Procedure for powering on the UPS unit from standby mode to normal operation.
Step-by-step instructions for safely replacing the UPS electronics module.
Procedure for safely replacing the UPS batteries, including precautions.
Detailed guide for replacing the internal batteries within the UPS unit.
Instructions for replacing external Extended Battery Modules (EBMs).
Guide to identifying and understanding UPS alarms and operational states.
Procedure for temporarily muting alarms while investigating the underlying issue.
To Next Page
