ADDITIONAL UPS FEATURES
Eaton 5125 Rack-Mount UPS (5000/6000 VA) User's Guide S 164201541 Rev D
www.eaton.com/powerquality
49
X-Slot Cards
X-Slot cards allow the UPS to communicate in a variety of networking
environments and with different types of devices.
NOTE If your UPS part number ends with -5507, your UPS includes the factory-installed
ConnectUPS -X Web/SNMP Card; continue to the following section, “The ConnectUPS-X
Web/SNMP Card.”
The Eaton 5125 has an available communication bay for one of the
following X-Slot cards:
S ConnectUPS-X Web/SNMP Card - has SNMP and HTTP capabilities as
well as monitoring through a Web browser interface; connects to a
twisted-pair Ethernet (10/100BaseT) network. It has a built-in
switching hub that allows three additional network devices to be
connected to the network without the requirement of additional
network drops. In addition, a Environmental Monitoring Probe can be
attached to obtain humidity, temperature, smoke alarm, and security
information.
S Relay Interface Card - has isolated dry contact (Form-C) relay outputs
for UPS status: Utility failure, Low battery, UPS alarm/OK, or On
bypass.
S Modbus
®
Card - allows you to continuously and reliably monitor the
UPSs in your Building Management System (BMS).
S Multi-Server Card - has six serial communication ports that can
communicate simultaneously with other computers using LanSafe
Power Management Software (provided on the Software Suite CD).
S USB Card - connects to a USB port on your computer.
t
To Next Page
Loading...
