Eaton Powerware 5130 - How to Replace Internal Batteries

UPS MAINTENANCE
Eaton 5130 Rack/Tower UPS (1000–3000 VA) User's Guide S 164201730 Rev 4
www.eaton.com/powerquality
49
How to Replace Internal Batteries
C A U T I O N
S Pull the battery out onto a flat, stable surface. The battery is unsupported when you pull
it out of the UPS.
S To ensure safety and high performance, use only batteries supplied by Eaton.
To replace the UPS internal batteries:
1. Remove the UPS front cover. Press the button on the left side of
the cover and then pull the left side (see Figure 25).
1
2
Figure 25. Removing the UPS Front Cover
2. Disconnect the internal battery connectors (see Figure 26).
1
2
Figure 26. Disconnecting the Internal Battery Connectors