UPS MAINTENANCE
Eaton 5130 Rack/Tower UPS (1000–3000 VA) User's Guide S 164201730 Rev 4
www.eaton.com/powerquality
50
3. Unscrew and remove the metal battery cover (see Figure 27).
1
2
Figure 27. Removing the Battery Cover
4. Pull the battery block out onto a flat, stable surface (see Figure 28).
See “Recycling the Used Battery or UPS” on page 52 for proper
disposal.
1
2
Figure 28. Removing the Battery Block
5. Install the new batteries in the reverse order of removal.
6. Replace the metal battery cover.
7. Replace the UPS front cover.
To Next Page
Loading...
