Eaton Powerware 9170+ UPS 3–18 kVA - Front Panel Display and Controls

OPERATION
Eaton 9170
+
UPS (3–18 kVA) User's Guide S 164201393 Rev E www.eaton.com/powerquality
80
Front Panel Display
The front panel has an alphanumeric display, three LED indicators, and
six pushbuttons as described in Figure 54 and in Table 10.
1 2 9 USER #3
Wout
watts 2.07 KW
Slot Top ESC
2
3
4
ABC
1
Figure 54. UPS Front Panel
Table 10. Front Panel Details
Item Description
1 Alphanumeric display of unit function and operating parameters. Also displays alarm/data logs.
2 Alarm LED (red)
Illuminates to signal that the unit has detected an alarm condition.
3 Battery LED (yellow)
Illuminates to signal that the unit is operating on battery power and producing output voltage.
4 Line LED (green)
Illuminates to signal that the unit is operating on AC utility power and producing output voltage.
A and B Multi-function buttons, as labeled by the bottom line of the alphanumeric display.
C Menu/Escape button, for moving into and out of display menus. Also, for avoiding a change to a
parameter value.
and
YB
Menu scroll up and down buttons. Also, for increasing/decreasing parameter value digits.
Enter button, to activate/accept displayed parameter or operating mode.