Need help?Do you have a question about the Eaton 91PS and is the answer not in the manual?
General| Topology | Double Conversion Online |
|---|---|
| Form Factor | Tower |
| Efficiency | Up to 95% |
| Operating Temperature | 0 to 40 °C |
| Relative Humidity | 0-95% non-condensing |
| Battery Type | Lead-acid |
| Communication Ports | USB, Serial |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Typical Recharge Time | 4 hours |
| Storage Temperature | -15 to 45 °C |
| Input Voltage | 220/230/240 VAC |
| Output Voltage | 220/230/240 VAC |
Details the various safety signs used throughout the document to highlight hazards.
Explains hazard symbols and common abbreviations used in the manual.
Describes the text formatting conventions used for clarity in the manual.
Provides a list of acronyms and their definitions used in Eaton UPS documentation.
Crucial safety instructions for installation, operation, and maintenance of the UPS.
Specifies the recommended environmental conditions for UPS operation and installation.
Illustrates and explains various symbols found on the UPS and its accessories.
Provides an overview of the Eaton 91PS/93PS UPS, its purpose, and capabilities.
Details the different operating modes: Double conversion, ESS, VMMS, Stored energy, Bypass.
Information on the UPS battery system, types, and configurations.
Covers environmental conditions and installation considerations for proper UPS setup.
Guidelines for preparing electrical wiring for UPS input, output, and bypass connections.
Procedural steps for physically installing the UPS unit and connecting its components.
Instructions for connecting multiple UPS units in parallel for increased capacity or redundancy.
Explains the control panel, status indicators, LEDs, and system event notifications.
Procedures for starting, stopping, transferring between modes, and managing UPS operations.
Instructions on how to use the EPO switch for emergency shutdown of the UPS.
Critical safety precautions for performing maintenance and servicing on the UPS.
Guidelines for routine maintenance tasks to ensure optimal UPS performance and longevity.
Technical specifications detailing voltage, frequency, phases, and current for UPS input.
Technical specifications detailing voltage, frequency, harmonic distortion, and overload capability.
Details on product warranty period, coverage, and limitations.
Best practices for configuring and maintaining the UPS securely against cyber threats.
To Next Page
