Need help?Do you have a question about the Eaton 93PM G2 Series and is the answer not in the manual?
General| Relative Humidity | 0-95% non-condensing |
|---|---|
| Input Voltage | 380/400/415V AC (3-phase) |
| Output Voltage | 380/400/415V AC (3-phase) |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Topology | Double Conversion |
| Battery Type | Valve-Regulated Lead-Acid (VRLA) |
| Communication Ports | USB, Serial, Modbus, SNMP |
| Dimensions (HxWxD) | Varies by model |
| Weight | Varies by model |
| Efficiency | Up to 97% |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
Contains critical DANGER, WARNING, and CAUTION notices for safe operation.
Outlines the basic sequence of steps for installing the UPS system.
Provides a checklist to ensure all installation tasks are completed correctly.
Details the necessary environmental and site requirements for UPS operation.
Provides step-by-step instructions for safely unpacking and unloading the UPS.
Detailed steps for routing power and control wiring into the UPS cabinet.
Instructions and safety precautions for installing the UPS battery system.
Instructions for connecting a remote Emergency Power-Off switch for safety.
Explains how to wire multiple UPS units for parallel operation.
Covers essential wiring preparations, including cable sizing and external bypass.
Explains the control panel, status indicators, and LED lights for monitoring.
Guides on starting, shutting down, and mode transitions for the UPS system.
Instructions for controlling individual UPMs and UPS units in parallel systems.
How to use the EPO switch and perform maintenance bypass procedures.
Critical safety warnings and precautions before performing maintenance.
Precautions and procedures for battery replacement and maintenance.
To Next Page
