Need help?Do you have a question about the Eaton 93PM G2 and is the answer not in the manual?
General| Runtime | Varies based on load and battery configuration |
|---|---|
| Weight | Varies by model |
| Topology | Double Conversion Online |
| Dimensions (W x D x H) | Varies by model |
| Output Frequency | 50/60 Hz |
| Battery Type | Valve-regulated lead-acid (VRLA) |
| Communication Ports | USB, RS-232, Ethernet, Relay contacts |
| Form Factor | Rack/Tower |
| Operating Temperature | 0 to 40 °C |
| Relative Humidity | 0 to 95% (non-condensing) |
| Certifications | CE |
Explains safety signs like DANGER, WARNING, CAUTION used in the document.
Lists hazard symbols and their meanings for safety warnings.
Details type conventions (bold, italic, screen type) for document clarity.
Provides a glossary of acronyms used in Eaton UPS documentation.
Presents critical safety warnings for UPS installation, operation, and maintenance.
Identifies the intended readers and their expected knowledge base.
Lists European directives and conformity information for CE marking.
Outlines permitted user operations and essential precautions to avoid hazards.
Specifies environmental requirements for UPS installation and operation.
Provides examples of symbols on the UPS to alert users to important information.
Directs users on how to obtain further information from Eaton.
Introduces the Eaton 93PM G2 UPS, its purpose, and general features.
Details the main external and internal components of the Eaton 93PM G2 UPS system.
Describes the different operating modes: Double conversion, VMMS, ESS, Stored energy, Bypass.
Explains the double conversion operating mode and its power path.
Details the VMMS mode for efficiency optimization and module management.
Describes the ESS mode, highlighting its efficiency and operation.
Explains UPS operation on stored energy or battery power.
Details the bypass mode, its functions, and associated cautions.
Provides an overview of standard UPS features.
Explains ABM technology for battery life and charging.
Describes Hot Sync technology for parallel system reliability.
Explains Power Conditioner mode functionality and limitations.
Details Frequency Converter mode capabilities and limitations.
Describes Sync Control for synchronizing two UPS systems.
Covers software and connectivity features.
Describes the user interface, including MiniSlot bays.
Explains Intelligent Power software for UPS management.
Details automatic firmware update for UPMs.
Explains automatic output power configuration.
Lists available options and accessories.
Describes the MBS for safe servicing.
Explains the top air exhaust kit.
Details the single feed kit option.
Describes the internal battery breaker.
Covers UPM installation and replacement.
Explains the battery system and default types.
Describes the switchgear for battery cabinet installation.
Details system configurations, frame sizes, and UPM counts.
Outlines the basic sequence of UPS installation steps.
Guides on creating a logical installation plan.
Provides a checklist for verifying installation steps and connections.
Details environmental and site requirements for UPS operation.
Specifies environmental requirements like temperature, humidity, and contaminants.
Covers installation aspects like floor suitability and configuration types.
Prepares power wiring, including considerations for bypass.
Provides instructions for safely unpacking and unloading the UPS cabinet.
Explains operator responsibilities for wiring and the need for qualified electricians.
Details the step-by-step process for installing the UPS, including wiring and panels.
Guides on installing the battery system, emphasizing safety.
Explains wiring for battery trip functionality.
Details installation of external battery cabinets and power cabling.
Describes installing a remote EPO switch for emergency shutdown.
Covers installation of input connectors and alarm relay.
Explains connecting customer input signals for remote control.
Details wiring interface for battery breakers.
Describes alarm relay outputs.
Explains installing and connecting the Industrial Relay Card.
Provides instructions for installing wiring to MiniSlot devices.
Covers installing signal connections for parallel UPS systems.
Details wiring multiple UPS units in parallel.
Overview of power wiring for parallel UPS systems.
Explains control signals for parallel operation.
Guides on preparing interface wiring for UPS features.
Describes UPS communication features.
Lists compatible MiniSlot cards and installation references.
Explains Intelligent Power Software for UPS management.
Details connecting alarms to signal inputs.
Describes the general purpose relay contact.
Guides on configuring relay outputs.
Provides instructions on operating the UPS, emphasizing pre-operation checks.
Explains UPS controls and indicators for status monitoring.
Describes the touch screen display for UPS control and status.
Details status indicators (LEDs) and their meanings.
Explains color-coded LED indicators on the UPS door.
Describes color-coded LED indicators on the UPM panel.
Explains how system events are indicated via horns, lights, and messages.
Presents the menu structure of the UPS control panel.
Details user-configurable settings via the UPS menu.
Explains signing in to the UPS control panel using passwords.
Provides instructions for controlling the UPS system's operation.
Guides on starting the UPS in double conversion mode.
Details starting the UPS in bypass mode.
Explains transfer from bypass to double conversion mode.
Guides transfer from double conversion to bypass mode.
Describes switching to ESS mode.
Explains transfer from ESS to double conversion mode.
Guides switching to VMMS mode.
Details transfer from VMMS to double conversion mode.
Provides instructions for shutting down the UPS and critical load.
Explains de-energizing the critical load and shutting down the UPS.
Covers controlling a single UPS in a parallel system.
Guides on starting a single UPS unit.
Explains shutting down a single redundant UPS.
Details how to turn the battery charger on or off.
Provides instructions for controlling individual UPMs.
Guides on starting individual UPMs.
Explains shutting down a single redundant UPM.
Details using the Remote EPO switch for emergency shutdown.
Guides switching UPS to maintenance bypass mode.
Explains returning UPS from maintenance bypass to double conversion mode.
Introduces UPS maintenance and design for easy access.
Provides critical safety instructions for UPS maintenance.
Outlines low preventive maintenance requirements.
Lists daily checks for the UPS system.
Details monthly maintenance tasks.
Advises periodic inspection for overheating.
States annual maintenance requires authorized personnel.
Notes battery maintenance is restricted to authorized personnel.
Guides proper disposal of used UPS and batteries.
Directs users to contact Eaton for maintenance training.
Informs users to contact Eaton for complete technical specifications.
Lists relevant directives and standards the UPS complies with.
Provides environmental specifications for the UPS.
Details the product warranty period, exclusions, and conditions.
Instructs users on information needed for warranty service.
Emphasizes device inventory for cybersecurity management.
Highlights importance of physical security for communication lines and ports.
Stresses secure configuration of logical access and user privileges.
Recommends best practices for logging administrative activities.
Advises regular firmware updates and cybersecurity risk analysis.
To Next Page
