EasyManua.ls Logo

Eaton 93PM G2 - Safety Instructions

Eaton 93PM G2
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Safety instructions
22..11 SSaaffeettyy iinnssttrruuccttiioonnss
DANGER
Important safety instructions!
This document contains important instructions that must be obeyed during the
installation, operation and maintenance of the UPS and the batteries. Read all
instructions before operating the equipment.
Keep this manual for future reference. These instructions are also available for download at
www.eaton.eu/
93pm.
DANGER
Operations inside the UPS must be done by an authorized Eaton Customer
Service Engineer or by other qualified service personnel authorized by Eaton.
There are no user-serviceable parts inside the UPS.
The UPS operates with mains, battery or bypass power. It contains components that carry high currents
and voltage. A properly installed enclosure is earthed and IP20 rated against electric shock and unwanted
objects. The UPS is a sophisticated power system and only qualified personnel are allowed to install and
service it.
DANGER
This UPS carries lethal voltages. All repairs and service must be done by
authorized personnel only. There are no user-serviceable parts inside the UPS.
WARNING
The UPS is powered by its own energy source (batteries). The output terminals could be
energized even when the UPS is disconnected from an AC source. To reduce the risk of
fire or electric shock, install the UPS in a temperature and humidity controlled, indoor
environment that is free of conductive contaminants. See temperature and humidity
limits in Technical data.
The ambient temperature limit must not be exceeded. Do not operate the UPS
near water or excessive humidity. The system is not intended for outdoor use.
Before you start any installation or service work, make sure that all AC and DC
power sources are disconnected. Power can come from multiple sources. Also
ensure system grounding / PE continuity.
In a parallel system, the output terminals could be energized even when the
UPS is turned off.
EATON 93PM G2 UPS USER’S AND INSTALLATION GUIDE P-164000956
-
February 2021 www.eaton.eu 1111

Table of Contents

Related product manuals