Table 18. Color LED indicators (screen and door)
Color LED indicators
(screen and door)
UPS status
Normal operation
Battery mode
The green LEDs on the sides of the UPS cabinet door are blinking and the
yellow symbol for battery mode is illuminated below the display. Since the
battery mode is a normal condition of the UPS, the green symbol for normal
operation is also illuminated below the display.
Bypass mode
Alarm
77..22..22..22 UUPPMM ssttaattuuss ccoolloorr LLEEDD iinnddiiccaattoorr
Each UPM has a status LED indicator. It is located on the bottom left corner of the UPM front panel. The
LEDs are red, green and blue (RGB). The color of the LED shows the state of the UPM. The most urgent
state is always the one shown. Only one color is shown at a time. The table below defines the color
coding.
Table 19. Color LED indicators
Color LED indicators (UPM)
UPM status
UPM starts up
UPM in online, battery or EnergyAware mode
EATON 93PM G2 UPS USER’S AND INSTALLATION GUIDE P-164000956
-
February 2021 www.eaton.eu 7700
To Next Page
Loading...
