Figure 17: External DC source breaker trip/status X8 and sync control interface
X11
X8:
1. +24V_TRIP_Power
2. BAT_Shunt_TRIP
3. BAT_Shunt_DET
4. GND
X11:
1. Bypass L1
2. Bypass L2
3. Bypass L3
4. Output L1
5. Output L2
6. Output L3
7. SYNC L1
8. SYNC L2
9. SYNC L3
5.3 Installing the battery system
DANGER
This UPS may have external batteries. The batteries are designed to
deliver a large amount of energy and an incorrect connection may lead
to a short circuit and cause serious injuries to the personnel or damages
to the equipment. In order to avoid damages to the equipment or injuries
to personnel, only commissioning personnel are allowed to perform the
connection of these batteries.
© Eaton Corporation plc 2020. All rights reserved. Revision: 001 Document ID: P-164000956 61 (141)
Eaton 93PM G2 UPS 50 – 360 kVA User’s and Installation Guide
To Next Page
Loading...
