Eaton 93PM G2 Series - Turn the UPS from the Maintenance Bypass Mode to the Double Conversion Mode

Figure 40: Maintenance bypass mode
A Bypass input (X2) 1 Bypass input switch (BIS)
B Rectifier input (X1) 2 Maintenance bypass switch (MBS)
C UPS output (X3)
7.9 Turn the UPS from the maintenance bypass mode
to the double conversion mode
To turn the UPS back to the double conversion mode:
© Eaton Corporation plc 2020. All rights reserved. Revision: 001 Document ID: P-164000956 107
(141)
Eaton 93PM G2 UPS 50 – 360 kVA User’s and Installation Guide