Eaton 93PR Series - Use of Service Reminder Function; Figure 6-31: Setting Password Modification Interface; Figure 6-32: Service Maintenance Reminder Interface

63
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-31: Setting password modication interface
6.2.10. Use of service reminder function
When a service expires, the “Service Maintenance Reminder” button will pop up on the Home
interface, as shown in Figure 6-32 .
Figure 6-32: Service maintenance reminder interface
Service reminders include the following four types:
1. Preventive maintenance reminder 2. Battery replacement reminder 3. Capacitor replacement
reminder 4. Fan replacement reminder.
Click the “Service Maintenance Reminder” button to enter the following interface. The prompts in
red indicate that the reminders have expired. The prompts in gray means the reminder has not
expired or the reminder has not been enabled.
If all the four service reminders have expired, click “Remind me in 6 months” or “Remind me in 1
month”, and then the four service reminders will be enabled again on the set date and time.
Click the “Learn more” button to see the detail tips.