Eaton 93PR 15-80 kW UPS
Installation and Operation Manual
58
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Table 6-6: Structure of Setting menu
Menu Option description
General
On the “General” interface, you can set the HMI display language, date, time,
brightness, buzzer enabling/disabling, and service reminder.
Meters On the “Meters” interface, you can set the UPS measurements.
Output On the “Output” interface, you can set the UPS output voltage and frequency.
Lamp Test
On the “Lamp Test” interface, you can check whether the four indicator lamps on the
control panel are normal.
Password
On the “Password” interface, you can modify the control password and set the
password.
Password level Option description
Control password The initial password is “1111”, which can be used to enter the control interface.
Setting password The initial password is “0101”, which can be used to enter the Setting interface.
Figure 6-20: Password verication setting interface
Figure 6-21: Setting interface
To Next Page
Loading...
Need help?
General
